qacafe - ip test solutions
Knowledge Base > WAN Cards (T1/E1 and V.35) > Do you have an example wanpipe1.conf file for the Sangoma S5148 T1/E1 card?

Do you have an example wanpipe1.conf file for the Sangoma S5148 T1/E1 card?

An example wanpipe1.conf configuration file for the legacy Sangoma S5148 T1/E1 card is provided below. A similar configuration file can be created using the wancfg_legacy utility included with latest wanpipe drivers available from Sangoma. 

#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Mon Nov 10 15:55:22 EST 2008
#
# Note: This file was generated automatically
#       by /usr/sbin/wancfg program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_CHDLC, Comment

[interfaces]
wp1chdlc = wanpipe1, , API, Comment

[wanpipe1]
CARD_TYPE 	= S51X
S514CPU 	= A
AUTO_PCISLOT	= YES
PCISLOT 	= 0
PCIBUS		= 0
FE_MEDIA 		= T1
FE_LCODE 		= B8ZS
FE_FRAME 		= ESF
TE_CLOCK 	= MASTER
TE_ACTIVE_CH	= ALL
TE_LBO 		= 0DB
TE_HIGHIMPEDANCE	= NO
Firmware	= /etc/wanpipe/firmware/cdual514.sfm
CommPort	= PRI
Receive_Only	= NO
Connection	= Permanent
LineCoding	= NRZ
LineIdle	= Flag
Interface 	= V35
Clocking 	= External
BaudRate 	= 1540000
MTU 		= 1522
UDPPORT 	= 9000
TTL 		= 255
IGNORE_FRONT_END  = NO

[wp1chdlc]
MULTICAST		= NO
IGNORE_DCD		= YES
IGNORE_CTS		= YES
IGNORE_KEEPALIVE	= YES
HDLC_STREAMING		= YES
KEEPALIVE_TX_TIMER	= 10000
KEEPALIVE_RX_TIMER	= 11000
KEEPALIVE_ERR_MARGIN	= 5
SLARP_TIMER		= 0
TRUE_ENCODING_TYPE	= NO